Blown-In Insulation in Cypress, TX
Insulating your Cypress, TX, home is the most effective way to reduce energy costs. Before, floors and walls were lined with anything to prevent cold air and moisture from entering the home. Renovations have revealed that even old newspapers were discovered packed into the walls and floorboards.
Insulating is now a science unto itself. R-factors are assigned to various insulating materials and methods to provide homes and buildings with appropriate protection for their geographic region. The higher the R rating, the better the insulated home. Blown-in insulation is a top-rated insulation that is relatively new to the industry – probably no more than a couple of decades old.
Top Benefits of Blown-In Insulation
● Value for Money
You want to get a good return on your investment with any home improvement project. Fortunately, blown-in attic insulation gives you a lot of value for your money since you can expect to save a lot on your energy costs after installation. The initial project costs may seem to be a little high for some homeowners, but you will see significant savings over the next few years.
You won’t have to worry about air conditioning or heating system leaks because the insulation will keep your home energy efficient.
● Easy Installation
One of the best things about blown-in insulation is how easy it is to install. A machine is used to blow the material into the spaces that need to be covered to create an insulation blanket. Professional insulation contractors can complete it in a matter of hours, which is significantly faster and less time-consuming than batt insulation, which sometimes necessitates drywall removal.
● High Energy Efficiency
Energy efficiency is one of the primary reasons homeowners invest in insulation solutions, so it stands to reason that it is one of the top benefits of blown-in insulation. Since this type involves blowing the material into your attic, it can better fill in cracks and crevices to stop air leaks. This makes your home more energy efficient.
Fiberglass remains a popular choice because it is made from recycled glass, but cellulose insulation has gained popularity in recent years due to its environmentally friendly properties. Furthermore, this insulation qualifies for LEED certification.
● Noise Reduction
Blown-in insulation is also well-known for its noise reduction and sound control. The blown insulation blanket has an airtight seal, which helps reduce both indoor and outdoor noise. This benefit will be especially appealing to people who enjoy using their attic for recreation or work because it allows them to relax at home.
● Fire Protection
As previously stated, the airtight seal from blown insulation provides an additional benefit. Because it prevents air from spreading into a fire and causing huge flames to erupt, this sealing quality makes your home more fire-resistant. This benefit is available to your home regardless of whether you use fiberglass or cellulose insulation.
● Lower Condensation
Blown insulation effectively covers gaps and small spaces, ensuring that your attic is completely insulated. It reduces condensation and moisture in the area, preventing mold and mildew growth. Moisture is a major concern for most homeowners because it can have detrimental effects on their insulation and roof, so you should avoid it as much as possible!
Insulation Materials We Use
Cellulose is made from recycled newspaper, cardboard, or wood fibers and can be made with or without binders. Cellulose is a common type of blown-in insulation because it is made from recycled materials and chemically treated to resist insects, mold, and fire. Boric acid, which is found naturally in seawater, fruits, and plants, is the primary chemical used to treat cellulose insulation.
Fiberglass is composed of plastic, glass, and other raw materials that are melted and spun into fibers with a wool-like texture. Moisture and fire resistance are properties of fiberglass insulation. Since fiberglass is composed of sand and glass, it is naturally non-combustible. Some loose-fill fiberglass products contain up to 80% recycled glass. Fiberglass contains a significant amount of recycled glass.
Increasing the R-value of your insulation may help you save money on energy bills and maximize your home’s energy efficiency. Blown-in insulation is an environmentally friendly and cost-effective way to insulate your attic, potentially lowering your cooling and heating bills. We recommend a powerful combination of insulation and proper air sealing for maximum energy efficiency. This can aid in the elimination of air leaks that occur in recessed light fixtures, plumbing areas, and ductwork.
During the hot summer months, blown-in insulation slows heat transfer from your attic to the lower levels of your home, and it works hard to keep warm air inside your home during the cold winter months. The attic is the primary location where heat enters and exits the home, making it difficult to maintain consistent temperatures. Proper insulation can reduce heat transfer while allowing your HVAC system to perform better.
● Environmentally Friendly
One of the numerous advantages of blown-in insulation is that it is environmentally friendly. It improves your home’s energy efficiency and helps protect the environment.
Cellulose is made up of 80 percent recycled materials, and the remaining is a non-toxic borate solution. This solution provides the insulation with a Class 1 fire safety rating and makes it mold and pest-resistant. Certain fiberglass products are non-combustible and can contain up to 80% recycled glass products.
Blown-in insulation prevents energy loss in your home and helps reduce emissions from heating and cooling equipment. Blown-in insulation may be the solution for homeowners looking for cost-effective ways to reduce their environmental impact, reduce energy waste, and improve home comfort.
● Affordable R-Value
Blown-in insulation is a dense, effective barrier against heating and cooling loss or gain, with an affordable R-value per inch. The letter “R” means resistance to heat flow. The greater the insulating power, the higher the R-value.
Dense-packed fiberglass or cellulose insulation blocks most air movement and has a higher R-value per inch than insulation installed at a lower density. Attics can accommodate a deep layer of insulation up to 16 to 26 inches by installing blown-in insulation, increasing heat flow resistance even higher.
Fiberglass blown-in insulation is a loose material that can be customized according to your local energy efficiency recommendations. Depending on your climate zone, you may require a higher R-value. The higher the R-value, the less airflow there will be, allowing you to save energy.
Frequently Asked Questions
● Should I Use Blown-In Insulation?
Blown-in insulation is most commonly used as reinforcement for fiberglass rolls or batt insulation. For example, if your attic space already has insulation but wants to reinforce it or add insulation, topping it off with blown-in insulation may be the best option — and certainly less expensive than replacing the existing insulation.
● How Much Does Attic Insulation Cost?
Pricing is determined by the size of your attic, the type of insulation used, and labor rates.
● How Long Will Blown-In Insulation Installation Take?
We can complete most projects in two days. This includes the removal, cleaning, and inspection of the project.
● How Much Will Blown-In Attic Insulation Save Me On My Energy Bill?
We’ve seen homes save up to 40% on their annual utility bill.
Contact Our Insulation Company in Cypress, TX
When you are ready to save money on energy and cooling and heating costs, contact our insulation company in Cypress, TX, today. We offer high-quality workmanship on all of our blown-in insulation projects in Cypress, TX, whether for residential homes or commercial businesses. Call us at (832) 224-3854 or fill out our form here to get your FREE quote today!
FREE INSTANT QUOTE
ENTER YOUR INFO BELOW