Energy Efficiency

While it is true that spray foam insulation costs more than other types of insulation, it will be worth every penny. The R-value of spray foam exceeds other insulation materials by a good margin. Its performance will save you money in the long run. The way foam insulation expands after its application leaves no room for the passage of air and water. Heat transfer is thus kept at the lowest minimum and this makes it easier to maintain the desired temperature in a room, whether hot or cold. The impact foam insulation will have on your energy bills depends on your location.

Sturdiness

While construction workers pay attention to the load-bearing requirements of structures, the effects of nature are barely considered. One excellent advantage that spray foam insulation has over other insulation types is that it adds to the structural integrity of a building. No other type of insulation does this. When foam insulation is sprayed on a surface, it spreads, filling cracks and crevices. This way, it bonds with the surface completely and adds to its strength. Insulation will serve as an additional layer of support and protection for your structure. For example, closed-cell insulation will save your attic from damage during storms.

Health

The installation of spray foam insulation will make your home or office healthier. This is because foam insulation will make your walls impenetrable for pollen and other allergens. Spray foam fills up all cracks and crevices, so there will be no chance for the penetration of air. Furthermore, both closed-cell and open-cell insulation will prevent the build-up of moisture in your property. In the absence of moisture and pollens, you can be assured that your building isn’t at risk of the growth of mold and mildew. The healthier your workplace, the higher its productivity.

Longevity

Another reason why you shouldn’t be put off by the cost of installing a spray foam insulation is that it is very long-lasting. It will retain its quality and efficiency for a long period of time. Spray foam insulation will neither break nor sag. You will only have to install spray foam insulation in your building once, regardless of how long you stay in it. Meanwhile, insulation materials such as fiberglass and styrofoam will become less efficient over time and hence, require replacements. Other forms of insulation will cost you more money in the future.

Spray Foam Insulation Cypress Tx, Spray Foam Insulation

Spray Foam insulation is the best home insulating material available. SPF insulation can seal your home against air and moisture intrusion, save money on utility bills, strengthen your home, and protect your family’s health from dangerous mold.

Spray foam insulation outperforms fiberglass and cellulose insulation, as illustrated by Military.com,

If you live in Cypress, TX, or the surrounding areas, you can rely on our reliable insulation company to improve your home’s energy efficiency.

We are the premier spray foam insulation company in Cypress, TX, for residential and commercial applications. Our experienced installers and our commitment to providing exceptional customer service make us the best choice for all your insulation needs. We believe in energy conservation through using high-quality, environmentally friendly products that result in lower energy bills.

Call us today at (832) 224-3854 for more information or to speak with one of our estimators.

Our Spray Foam Insulation Services

Spray foam is the best home insulation material. This is because spray foam can fill all of the smallest cracks and crevices that may be causing conditioned air loss.

Spray foam also functions as a moisture barrier. Because of this, spray foam is most commonly used in crawl spaces and attic insulation. When used for crawlspace insulation, spray foam can easily prevent flooding and mold growth.

Spray foam acts as an air barrier, reducing air infiltration and improving air circulation in your home.

In addition, spray insulation can cut your utility bills by up to 50%. Because spray foam insulation can significantly reduce air infiltration within your home, it is a good choice.

Furthermore, foam insulation is also known as soundproof insulation because spray foam can prevent unwanted noise from entering your home.

Insulation Installation in Cypress, TX

If you choose Cypress Insulation Company in Cypress, TX as your home insulation provider, our insulation contractors will conduct a preliminary visit to your property, if necessary.

If you have old insulation, we will remove it before installing new insulation. We’ll clean up and leave as if nothing happened.

Spray foam is safe once installed. Furthermore, unlike fiberglass and cellulose, which are easily combustible, spray foam is fire resistant.

Other types of insulation, such as cellulose and fiberglass, can be hazardous to your health. This is because cellulose and fiberglass contain formaldehyde, a poisonous chemical that can cause skin rashes, headaches, and asthma.

Benefits of Spray Foam Insulation

Wet spray foam insulation is applied and expands to form a thick foam that fits snugly into wall cavities, crevices, and gaps. It can be installed in difficult-to-reach areas and around piping and wiring.

There are open-cell and closed-cell spray foam options for installing residential insulation.

Spray foam insulation has the advantage of being very energy-efficient and supporting proper air sealing. If you have a drafty house, spray foam insulation may be your best option.

Spray foam insulation can also be beneficial:

● Make your house more comfortable all year.

● Reduce noises from outside your home and between different rooms and levels.

● Enhance the performance of your HVAC systems

● Protect against air and moisture infiltration

● Contribute to a healthier environment

● It can be used nearly anywhere (walls, attics, etc.)

FAQ about Spray Foam Insulation in Cypress, Tx

Can spray foam be used on existing walls?

If you have a newly built home or are starting a renovation, you may find that the insulation in your walls is inadequate. You might even discover that your walls have no insulation at all.

Spray foam is one of the most effective methods for improving wall insulation, and it is possible to add spray foam to existing walls without tearing them down.

If your walls lack insulation, adding spray foam is a simple process that requires only a few holes that can be easily patched. Simply spray the foam into the holes until a section is completely filled. Then you proceed to the next section.

This method works if there is already insulation present, as the foam will simply fill in the spaces where the other insulation is not present. If insulation is present, inspect it to see if it is damp or moldy. If this is the case, you may have to cut out some wall portions to remove the old insulation.

How much wall insulation do I need?

Several factors will come into play when calculating how much wall insulation you need. First and foremost, you must determine the square footage of the walls in question. Second, decide what type of insulation to use and how much to use, as well as what type of insulation is present.

You’ll also need to know the existing insulation’s R-value and what you’re installing. R-38 insulation is ideal at a depth of about 12 inches. There are several online calculators that can help you determine how much insulation to install in your walls and throughout your home.

Additional costs and considerations

When you install insulation, it should be done during new construction. Consequently, labor costs of installing spray foam insulation will remain low as there will be more space readily available for installation. However, drywall may have to be removed to reach the stud spaces, and certain installers may be reluctant if the space is not visible. Spray foam insulations are constructed to cover the walls with thin layers extending up to a metre thick. The layer has been dried completely prior to subsequent layer addition.

You’ll also need to know the existing insulation’s R-value and what you’re installing. R-38 insulation is ideal at a depth of about 12 inches. There are several online calculators that can help you determine how much insulation to install in your walls and throughout your home.

What is the R-value of two inches of spray foam?

You can use either open-cell or closed-cell spray foam for wall insulation. Closed-cell insulation has a higher R-value per inch than open-cell insulation. Closed-cell foam typically has an R-value of 6.5 to 7 per inch, whereas open-cell foam has an R-value of 3.5 to 3.6 per inch.

You’ll also need to know the existing insulation’s R-value and what you’re installing. R-38 insulation is ideal at a depth of about 12 inches. There are several online calculators that can help you determine how much insulation to install in your walls and throughout your home.

Can I spray foam myself?

It can be highly beneficial if you want to use spray foam as wall insulation or anywhere else. However, it is not recommended that you install the foam yourself. Even with kits available at a big box store, the instructions will state “For Professional Use Only.”

If an open flame is nearby, materials such as the paint used to seal the foam can catch fire. Spraying chemicals also necessitates the use of safety goggles and masks, though many professionals wear protective suits. Unless you are familiar with the materials and have the necessary safety equipment, it is usually best to hire a professional to install the insulation.

You’ll also need to know the existing insulation’s R-value and what you’re installing. R-38 insulation is ideal at a depth of about 12 inches. There are several online calculators that can help you determine how much insulation to install in your walls and throughout your home.

Is wall insulation fireproof?

If an open flame is present, the individual chemicals used in spray foam can be flammable when applied. When used as wall insulation, a thermal barrier is positioned between the flammable material and the wall. The thermal barrier prevents the foam from burning.

Can foam wall insulation get wet?

One issue that homeowners may face after installing insulation is the possibility that the insulation will become wet if there is a leak and moisture enters the walls through any vapor or moisture barriers.

Fiberglass insulation is vulnerable to water damage, and wet insulation must be removed because it can cause mold or mildew growth and structural damage or rotting. Both open-cell and closed-cell spray foam are extremely water resistant. The open-cell foam dries quickly, whereas closed-cell foam does not absorb water.

Is it necessary to leave your home during spray foam insulation?

Unfortunately, when spray foam insulation is installed in your home, whether it’s wall insulation or attic insulation, you must leave your home for approximately 24 hours until the spray foam has dried and hardened. When you don’t wear protective gear like professional installers, the chemicals in the foam can be toxic.

Is wall insulation worth it?

You’ll benefit from any type of wall insulation you install. Your home’s overall energy efficiency will improve, saving you money on utility costs. This is especially true with spray foam insulation.

Benefits of Spray Foam Insulation

The R-value of insulation is greater than that of insulation materials of lesser R-values. The resistance measurement to a heat transfer is the way the values are calculated. Spray foam is known for providing excellent thermal and breathable insulation as it also delivers sound protection qualities. Open cell PF is good for sound as compared to closed cell PF. A load bearing structure is a wall. Before construction is completed, a building engineer will design a residence for protection from severe forces such as hurricanes and tornadoes. Builders use spray foam to add structural support to the homes. Spray foam is a glue for homes.

Your Cypress, TX Insulation Contractors

Spray foam insulation is cost-effective, but it is not the cheapest option in the beginning. You may need to stretch your budget to insulate your property with spray foam. However, as Green Garage Blog illustrates, once you insulate your home, you can forget about reinsulating it because spray foam lasts the life of the house. Furthermore, the savings in monthly energy costs will allow you to recoup your investment in a few years, if not sooner.

Company provides best insulation services

Regardless, you can count on Cypress Insulation Company in Cypress, TX, to provide the best insulation services at an affordable price.

Call us.

Call us today to begin your home or commercial insulation renovation!